Home Residential Commercial AC Repair Furnace Repair HVAC Repair AC Installation Heating Repair Furnace Installation HVAC Installation HVAC Replacement Heat Pump Installation Ductless Mini Split Installation Air Duct Cleaning HVAC Maintenance Blog
(380) 255-5991
Furnace Repair in Columbus, OH: gas furnace and ductwork in a basement mechanical room

Furnace Repair in Columbus, OH

Fast Furnace Repair Done Right the First Time

A furnace that will not light turns the whole house against you. Our experienced technicians diagnose and repair furnaces across Columbus fast, often the same day you call.

Ask About Our Pricing

Same-Day Appointments All Brands Serviced
Call (380) 255-5991
Available now. Current wait time: 0–2 minutes
★★★★★ 4.9 / 5 stars (120+ reviews)
Home / Services / Furnace Repair
Our technicians who handle Furnace Repair in Columbus, OH
Serving Columbus

Experienced HVAC Pros You Can Count On

From the first diagnostic visit to the final airflow check, Columbus HVAC handles every phase of HVAC work for Columbus properties with precision, professionalism, and a commitment to lasting results.

1,200+Systems Serviced
LocalTechnicians
UpfrontQuotes

From the hallway, a furnace that will not heat looks the same no matter what broke. Inside the cabinet, though, the sequence is strict: inducer on, pressure switch closed, igniter glowing, gas valve open, burners lit, flame proven, and finally the blower sending heat through the house. Most of the diagnosis comes down to finding the broken link. In Columbus homes, it tends to be the same handful of culprits: a flame sensor coated in oxide, a hot surface igniter cracked by thermal cycling, a pressure switch held open by a tired inducer or a plugged condensate trap, or a control board with a burned relay.

Fast SchedulingCalls answered by real people
Clear Written QuotesNo surprise charges
Every Brand ServicedExperienced, local technicians

Cooling trouble instead? See AC Repair.

When to Call for Furnace Repair in Columbus

The sooner you notice these red flags, the easier and cheaper the fix. Watch for these telltale signs:

  • Short cycling every few minutes without reaching the setpoint
  • Soot, rust, or moisture near the furnace cabinet or vent pipe
  • Grinding or high-pitched squeals from the blower
  • Clicking and a glowing igniter with no burner flame
  • A fan that keeps running while the registers blow cool air
  • Flames that start, last a few seconds, and go out again and again
  • Booming or banging at light-off from delayed ignition
  • A flame that burns soft and yellow rather than steady blue

Act Before It Gets Worse

What seems like a minor issue today can take out a compressor or heat exchanger tomorrow. Don't wait, call (380) 255-5991 and we'll take a look right away.

Technician holding a new hot surface igniter at an open gas furnace in Columbus, OH
With the burner panel off, the igniter, flame sensor and burners can all be checked in a few minutes.
Our Approach

What Goes Into Our Furnace Repair

Rather than guess, Columbus HVAC tests the sequence stage by stage. We read igniter resistance, measure flame signal in microamps, check that the pressure switch responds to real inducer draft, confirm voltage at the gas valve, and test the blower and its capacitor. Because this is a fuel-burning appliance, the safety basics come with every visit: the heat exchanger gets inspected, gas connections get leak-tested, and draft gets verified. You cannot tell a furnace problem from a furnace hazard by looking at the thermostat. Before we leave, temperature rise is measured against the data plate so airflow and flame are matched as the manufacturer intended.

Columbus HVAC services natural gas, propane, and electric furnaces of every major brand, from standard 80 percent units to condensing high-efficiency models with their traps, drain lines, and dual pressure switches. Our trucks carry the parts that actually fail, such as igniters, flame sensors, pressure switches, capacitors, inducer assemblies, and blower motors, so a typical no-heat call ends with the house warming up. Call (380) 255-5991 for furnace repair anywhere in Columbus, and an experienced technician will be on the way today.

Typical Costs

How Much Does Furnace Repair Cost in Columbus?

Most furnace repairs in Columbus cost between $150 and $600. Cleaning a flame sensor is a small job; replacing a blower motor or control board is a bigger one. You'll get a written, upfront price from Columbus HVAC after we diagnose the problem.

What Moves the Cost Up or Down

  • Furnace age and type, because 90%+ efficiency models have more specialized parts
  • Whether a cracked heat exchanger is found, which usually means replacement rather than repair
  • Timing, such as a no-heat call on a cold night versus a scheduled repair
  • Access to the furnace in attics, closets, or crawlspaces

If your furnace is past 15 to 20 years old or the repair is a major one, we'll give you repair and replacement prices side by side. Call (380) 255-5991 for a quote.

RepairTypical costWhat it usually means
Flame sensor cleaning or replacementBurners light but cut out almost immediately$80–$250Furnace lights, then shuts off within seconds
Hot surface igniter replacementNo ignition; one of the most common winter failures$150–$400Furnace clicks and tries to start but never lights
Draft inducer motorStartup fan fails, furnace won't fire$400–$1,000Loud humming or grinding at startup, then lockout
Blower motorNo airflow, or the blower runs nonstop$400–$1,500No airflow, or the blower runs nonstop
Control boardErratic behavior, error codes, or no response at all$300–$700Erratic behavior, error codes, or no response at all
Gas valve replacementValve fails to open, so the furnace never lights$250–$700Igniter glows but gas never flows to the burners

Typical ranges for common repairs. Your exact price is quoted after diagnosis.

Step by Step

Our Furnace Repair Process

We work through a clear, repeatable process so nothing gets overlooked on your property.

1

Step-by-Step Diagnosis

We watch the furnace's startup sequence and measure at every stage: inducer draft, pressure switch, igniter resistance, flame signal, and gas valve operation, to find exactly where it breaks.

2

Combustion Safety Check

The heat exchanger is inspected, gas connections are leak-tested, and flue draft verified on every visit. A furnace repair that is not proven safe is not finished.

3

Same-Visit Repair

Most furnace repairs finish in one trip. The common failure parts, from igniters and flame sensors to pressure switches, capacitors, and motors, are stocked on the truck and ready to go.

4

Complete Verification

We finish with a full-cycle test: temperature rise matched to the data plate, smooth ignition with no booming, and every limit switch and safety control confirmed working.

Furnace Repair Issues? We Can Help.

Available now. Current wait time: 0–2 minutes

Call (380) 255-5991 Now
FAQ

Furnace Repair FAQ

Still not sure? A quick call gets you a straight answer.

Talk to us: (380) 255-5991
Almost always a flame-proving problem: the sensor is coated in oxide and cannot confirm the burners are lit, so the board shuts the gas valve within seconds. Three failed tries usually triggers a lockout. Cleaning helps, but a sensor that fouls repeatedly is telling you something. Call (380) 255-5991 and we will fix the cause in Columbus.
It is worth calling about promptly. A boom at startup means gas is building up before it lights, usually because of dirty burners or a weak igniter. Each of those hard ignitions puts stress on the heat exchanger, a part you never want to see crack. Caught early, the fix is simple. Call (380) 255-5991 before it becomes an expensive one.
It depends on where the startup stops. No glow from the igniter usually means the igniter is cracked or the board is not powering it. A glowing igniter with no flame points to the gas valve or the circuit that controls it. And if the click is followed by nothing at all, the pressure switch may not be closing because the inducer is weak or the flue is blocked. We test every step. Call (380) 255-5991 for a diagnosis.
A well-maintained gas furnace typically delivers fifteen to twenty years, and electric furnaces often longer. Filters and annual service are what separate the twenty-year units from the twelve-year ones. If yours is in that range and facing a major repair, we will give you an honest read on whether it is worth it. Call (380) 255-5991 in Columbus for straight answers.
Safety First

Why Hire a Professional for Furnace Repair?

A furnace combines gas, flame, high voltage, and a flue in one cabinet, and the failure that matters most is the one you cannot see from outside: a compromised heat exchanger passing combustion gases into the air your blower pushes through the house. Delayed ignition that booms at light-off stresses that exchanger further every morning it goes unfixed. Meanwhile the diagnostic traps stack up: a furnace that trips its high limit may have a bad switch, or it may be protecting itself from a clogged filter or a dying blower, and replacing the switch in the second case just removes a safety while leaving the fault.

Our experienced technicians treat every symptom as a question about the whole system. Flame signal gets measured rather than assumed, so a healthy sensor is never replaced while a cracked igniter or weak gas valve skates by. Draft is verified at the pressure switch and the flue. Temperature rise is checked against the data plate, which is how airflow problems get caught before they shorten the exchanger's life. And the gas side is leak-tested with instruments, not a sniff and a shrug. The result is a furnace that has been proven safe and correct under a full cycle, and an honest report if the unit is nearing the point where replacement beats another repair.

Comparing DIY and Professional Furnace Repair

Online tutorials may help in a pinch, yet lasting repairs and code-compliant installs depend on trained technicians.

FactorDIY AttemptProfessional Service
Exchanger Cracks Damage hidden inside the cabinet Checked every time we open the unit
Ignition Faults Parts swapped against a code list Igniter, sensor, and valve each metered
Gas Safety Connections judged by smell Instrument leak test on each visit
Limit Trips Limit replaced, cause left behind Root cause of overheating corrected
Blower Setup Airflow assumed, not measured Blower tuned to the rated rise
Verification It lit once, call it fixed Complete cycles tested before we leave
Gas furnace and PVC venting in a basement utility room in Columbus
Maintenance

Furnace Repair Prevention Tips

Taking preventive measures can help you avoid costly heating and cooling problems down the road. Follow these tips from our experienced technicians:

  • Avoid packing the utility room, because burners need open space for combustion air
  • Pay attention when the burners light, since a boom instead of a soft whoosh calls for service
  • Schedule service each fall to catch worn igniters and dirty sensors before cold weather arrives
  • On high-efficiency models, keep the condensate trap and drain line clear and draining
  • Change the filter monthly during heating season; it is the cheapest furnace part you will ever buy
  • Store laundry supplies, especially chlorine products, well away from the furnace closet
  • Put a carbon monoxide detector on every level and test them monthly

Get Furnace Repair Help Today

Get your comfort back before a small fault becomes a full breakdown.

Get Help: (380) 255-5991

Furnace Repair Near Columbus

We bring furnace repair to homes and businesses in town and across the nearby communities. Pick your area to see local details.

Columbus Cleveland Cincinnati Dayton Akron Toledo Youngstown

More HVAC Services

HVAC Repair AC Repair HVAC Maintenance AC Installation HVAC Replacement Heat Pump Installation Air Duct Cleaning Furnace Installation Ductless Mini Split Installation HVAC Installation Heating Repair

Homeowner Guides

The Columbus HVAC Difference

The Columbus HVAC Promise

We've built our reputation in Columbus through honest work, fair pricing, and furnace repair results that last.

Your Columbus Neighbors

We're your neighbors, not a faraway call center. You'll deal with the same familiar faces every visit.

Honest, Upfront Pricing

Before we lift a finger, you'll know the full scope and the exact price, no fine print and no pressure to add on extras.

Fixed Right the First Time

We dig deeper than the symptom, from error codes to static pressure, so your comfort stays reliable long after we leave.

Safe, By-the-Book Installs

HVAC systems combine gas, refrigerant, and high-voltage electricity. Our technicians follow code on every connection, from gas lines to disconnects, and test everything before we leave.

★★★★★ Rated 4.9/5 by Columbus homeowners  ·  Upfront Pricing  ·  Fast Response  ·  All Brands Serviced

Book Furnace Repair Service Now

Protect your home and your peace of mind today, Columbus HVAC can have a technician out to you soon.

Call (380) 255-5991 Now
Heating Trouble? Call NowSame-Day Service Available